jeepmann1
Trade Count:
( 22)
Contributor
 Online
Posts: 334
|
 |
« on: September 25, 2009, 05:33:46 PM » |
|
Just an Idea here, how about a group buy on a 357 max reamer after the group of original buyers use it charge a small fee for its use and donate it to the upkeep of this site?
|
|
|
|
|
Logged
|
|
|
|
quickdtoo
GBO M.V.P.
Global Moderator
Trade Count:
( 99)
Senior Member
Online
Gender: 
Posts: 30683
|
|
« Reply #1 on: September 25, 2009, 07:00:32 PM » |
|
That sounds like an outstanding idea Jeepmann, if Bill will give us his approval, I already have the reamer.  Tim |
|
|
|
|
Logged
|
|
|
|
cowboyup453
GBO Supporter
Trade Count:
( 60)
Contributor
 Offline
Gender:
Posts: 463
|
|
« Reply #2 on: September 25, 2009, 07:41:29 PM » |
|
That sounds like an outstanding idea Jeepmann, if Bill will give us his approval, I already have the reamer. Tim I have one also. The last time I asked Bill he said no cause 4d was a sponsor. Might be ok now that they aren't.  |
|
|
|
|
Logged
|
|
|
|
|
mechanic
|
|
« Reply #3 on: September 25, 2009, 07:48:40 PM » |
|
Count me in. I only need to remove about .030 of material.
|
|
|
|
|
Logged
|
Some days its not worth chewing through the restraints!
The opinions offered by the author may have no basis in reality, but I ain't backin' down!
|
|
|
eddiegjr
GBO Supporter
Trade Count:
( 0)
A Real Regular
Offline
Gender:
Posts: 726
|
|
« Reply #4 on: September 25, 2009, 08:08:26 PM » |
|
I've already reamed to MAX but I would be willing to contribute and also contribute to a 445 SM reamer and other tools for a bank of equipment or reamers or other equipment to build some common "Wanted" conversions. 30-30 AI, 307/6mm AI, and what ever came up with high demand from members. Sho is gonna be hard to get the lathe from place to place!  eddiegjr |
|
|
|
|
Logged
|
St Judes Childrens Research Hospital
|
|
|
jeepmann1
Trade Count:
( 22)
Contributor
Online
Posts: 334
|
|
« Reply #5 on: September 25, 2009, 09:14:26 PM » |
|
Just to run some numbers by:
Reamer rental $10.00
Postage $ 4.50
Total $ 14.50
Donation to GBO $10.00
reasonable guess as to rentals 20 per year
for a donation of $200.00 per year , although I think the rental numbers would be greater
Your thoughts are appreciated
George
|
|
|
|
|
Logged
|
|
|
|
LaOtto222
GBO Supporter
Trade Count:
( 0)
Senior Member
Offline
Gender:
Posts: 2875
|
|
« Reply #6 on: September 26, 2009, 03:15:30 AM » |
|
Doesn't reamers have to be sharpened once in a while? Who would do that without ruining the reamer? I already have a 357 Max, but a 445 Super Mag would pique my interest.
|
|
|
|
|
Logged
|
Great men have vision and resolve to make dreams come true.
|
|
|
zoner
Trade Count:
( 23)
A Real Regular
Offline
Posts: 771
|
|
« Reply #7 on: September 26, 2009, 05:30:00 AM » |
|
ya could count me in.....Mike
|
|
|
|
|
Logged
|
|
|
|
jeepmann1
Trade Count:
( 22)
Contributor
Online
Posts: 334
|
|
« Reply #8 on: September 26, 2009, 06:44:00 AM » |
|
Yes reamers can be resharpened but only once or twice usually. However , no more than a Max reamer will cut out a 357 chamber it should last a very long time turning it by hand and using plenty of cutting fluid.Shipping would be harder on it than the actual cutting process. That being said a nice fitting tube of hose will protect it from the evils of flat rate shipping lol !
|
|
|
|
|
Logged
|
|
|
|
petemi
GBO Supporter
Trade Count:
( 13)
Senior Member
Offline
Gender:
Posts: 2670
|
|
« Reply #9 on: September 26, 2009, 08:16:09 AM » |
|
I'm in on it. I've got one more to do, and there's no sense letting it sit around as a Mag. I'm thinking too, .357 Handis would be a great gift for certain people on special occasions. Might as well give them a Max.
Pete
|
|
|
|
|
Logged
|
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family: .22 WMR, .22-250, .223, 7mm-08, .30/06 SS, .357 Max. 22 inch blk syn MC , .357 Max. 16.5 inch BC Carbine, .445 Super Mag., .45LC, .45-70, .50 Huntsman SS, .410, 20 ga.
|
|
|
eddiegjr
GBO Supporter
Trade Count:
( 0)
A Real Regular
Offline
Gender:
Posts: 726
|
|
« Reply #10 on: September 26, 2009, 01:38:20 PM » |
|
When I reamed my Mag it looked like the lead in front of the end of the mouth of the case side wall cutter did most of the cutting, forceing cone or whatever. I wonder if the rim sholder on the reamer could be set back with resharpening for a longer life. The back end of tne flutes for the case wall being dull would be an advantage, not opoening up the OD shell case go/ng or ID chamber wall. The working edges are in about the first 1/4 inch or less in front of the side wall flutes. For a ream from Mag to Max anyway.
eddie
|
|
|
|
|
Logged
|
St Judes Childrens Research Hospital
|
|
|
BrianB
Trade Count:
( 3)
Avid Poster
Offline
Posts: 192
|
|
« Reply #11 on: September 26, 2009, 08:08:49 PM » |
|
I'm in.
|
|
|
|
|
Logged
|
|
|
|
krod47nw
GBO Supporter
Trade Count:
( 124)
A Real Regular
Online
Gender:
Posts: 797
|
|
« Reply #12 on: September 27, 2009, 12:41:49 AM » |
|
I've got one to do. Count me in.
Kevin
|
|
|
|
|
Logged
|
|
|
|
jeepmann1
Trade Count:
( 22)
Contributor
Online
Posts: 334
|
|
« Reply #13 on: September 27, 2009, 07:23:50 AM » |
|
Looks like there is some interest, all we need now is the ok from Bill
|
|
|
|
|
Logged
|
|
|
|
kevinsmith5
Trade Count:
( 0)
A Real Regular
Offline
Gender:
Posts: 692
|
|
« Reply #14 on: September 27, 2009, 09:28:19 AM » |
|
Have a throat reamer for 45-70.
|
|
|
|
|
Logged
|
If he's carrying a singleshot, don't expect a warning shot!
|
|
|
AtlLaw
Moderators
Trade Count:
( 13)
Senior Member
Offline
Gender:
Posts: 3199
A rifle is a "Handi" thing to have!
|
|
« Reply #15 on: September 27, 2009, 10:39:08 AM » |
|
I'd probably have a use for it also... maybe... I hope... anbody got a 357 Bbl for sale... Have a throat reamer for 45-70. A lot of people could use that! Like Tyler, Jerry, and many, many others! Tyler also has the extention I made so you could use the throater in longer (i.e. 45-120) chambers. |
|
|
|
|
Logged
|
Richard
Former Captain of Horse and keeper of the peace, current interpreter of statute
Support your local US Military Vets Motorcycle Club
|
|
|
quickdtoo
GBO M.V.P.
Global Moderator
Trade Count:
( 99)
Senior Member
Online
Gender:
Posts: 30683
|
|
« Reply #16 on: September 27, 2009, 04:52:26 PM » |
|
Ok, Graybeard has given his approval on this, I dunno how other reamer owners want to handle theirs, but for mine I'd like to deal with each "renter" one at a time, send the reamer off to them insured priority mail which costs a little over $7, the reamer would be returned by the same with a $20 money, unless you want to contribute more to GBO which will be arranged up front, I'd keep track of the funds, and send the money accumulated over the cost of the reamer and my shipping costs to Graybeard once the reamer was paid for, and continue to do so as long as the reamer is still working well. This has been done before, only the owner received all the funds for the reamer which was more than paid for, the reamer eventually disappeared due to it being sent from renter to renter instead of back to the owner which doesn't help accountability for the reamer or the funds.
I'm open to suggestions if anyone has em, if you rent a reamer from Elk Ridge or 4D for comparison, the cost is ~$38 plus return shipping.
Tim
|
|
|
|
|
Logged
|
|
|
|
briannmilewis
Trade Count:
( 1)
Contributor
Offline
Posts: 491
|
|
« Reply #17 on: September 27, 2009, 06:56:32 PM » |
|
I think as long as everyone uses a flat rate cost, shipping and donation, and everyone is the keeper of their own tools - just like Tim said - from owner to renter and back to owner.
The only other system I could think of is having someone willing to be the "tool bank" manager, and everyone send their tool to the bank, and the manager is the sole source for rentals and tools are always out from the bank and back into the bank, so none are lost. The bank manager would keep a written journal and report once a month to the forum. FWIW
P.S. I would volunteer to be the tool bank manager as soon as I win the lottery.
|
|
|
|
|
Logged
|
|
|
|
wayne24
GBO Supporter
Trade Count:
( 0)
Member
Offline
Gender:
Posts: 76
|
|
« Reply #18 on: September 28, 2009, 09:21:30 AM » |
|
I'm in on the reamer idea to.A 445 SM would be great to.
Wayne
|
|
|
|
|
Logged
|
|
|
|
kevinsmith5
Trade Count:
( 0)
A Real Regular
Offline
Gender:
Posts: 692
|
|
« Reply #19 on: September 28, 2009, 03:12:05 PM » |
|
Anybody out there got a 22 mag chamber cutter?
|
|
|
|
|
Logged
|
If he's carrying a singleshot, don't expect a warning shot!
|
|
|
eddiegjr
GBO Supporter
Trade Count:
( 0)
A Real Regular
Offline
Gender:
Posts: 726
|
|
« Reply #20 on: September 28, 2009, 06:18:53 PM » |
|
Can a sticky be hung to give access to tools and directions eventually? Edit: Directions for renting, shipping and returning to each tool owner, Sorry.
|
|
|
|
« Last Edit: September 28, 2009, 08:39:38 PM by eddiegjr »
|
Logged
|
St Judes Childrens Research Hospital
|
|
|
quickdtoo
GBO M.V.P.
Global Moderator
Trade Count:
( 99)
Senior Member
Online
Gender:
Posts: 30683
|
|
« Reply #21 on: September 28, 2009, 07:43:22 PM » |
|
Instructions for reaming to max are already in the FAQs.
Tim
|
|
|
|
|
Logged
|
|
|
|
cowboyup453
GBO Supporter
Trade Count:
( 60)
Contributor
Offline
Gender:
Posts: 463
|
|
« Reply #22 on: September 28, 2009, 08:13:12 PM » |
|
Ok, Graybeard has given his approval on this, I dunno how other reamer owners want to handle theirs, but for mine I'd like to deal with each "renter" one at a time, send the reamer off to them insured priority mail which costs a little over $7, the reamer would be returned by the same with a $20 money, unless you want to contribute more to GBO which will be arranged up front, I'd keep track of the funds, and send the money accumulated over the cost of the reamer and my shipping costs to Graybeard once the reamer was paid for, and continue to do so as long as the reamer is still working well. This has been done before, only the owner received all the funds for the reamer which was more than paid for, the reamer eventually disappeared due to it being sent from renter to renter instead of back to the owner which doesn't help accountability for the reamer or the funds.
I'm open to suggestions if anyone has em, if you rent a reamer from Elk Ridge or 4D for comparison, the cost is ~$38 plus return shipping.
Tim
Sounds good to me. |
|
|
|
|
Logged
|
|
|
|
BrianB
Trade Count:
( 3)
Avid Poster
Offline
Posts: 192
|
|
« Reply #23 on: September 28, 2009, 08:29:18 PM » |
|
Ok, Graybeard has given his approval on this, I dunno how other reamer owners want to handle theirs, but for mine I'd like to deal with each "renter" one at a time, send the reamer off to them insured priority mail which costs a little over $7, the reamer would be returned by the same with a $20 money, unless you want to contribute more to GBO which will be arranged up front, I'd keep track of the funds, and send the money accumulated over the cost of the reamer and my shipping costs to Graybeard once the reamer was paid for, and continue to do so as long as the reamer is still working well. This has been done before, only the owner received all the funds for the reamer which was more than paid for, the reamer eventually disappeared due to it being sent from renter to renter instead of back to the owner which doesn't help accountability for the reamer or the funds.
I'm open to suggestions if anyone has em, if you rent a reamer from Elk Ridge or 4D for comparison, the cost is ~$38 plus return shipping.
Tim
Sounds good to me, I'll be in line for it as soon as deer season ends. |
|
|
|
|
Logged
|
|
|
|
JerryKo
GBO Supporter
Trade Count:
( 42)
A Real Regular
Offline
Gender:
Posts: 887
|
 |
« Reply #24 on: September 30, 2009, 12:09:57 PM » |
|
Very good idea guys. This is defenently the right place to be! Jerry 45-70 throater? I like my 405 grainers. Still have in the thousands left. When they are gone....maybe. |
|
|
|
|
Logged
|
"It's not whether you get knocked down, it's whether you get up."- Vince Lombardi
|
|
|
Doublebass73
GBO Supporter
Trade Count:
( 9)
A Real Regular
Offline
Posts: 692
|
|
« Reply #25 on: September 30, 2009, 04:46:55 PM » |
|
What, no .454 Casull? |
|
|
|
|
Logged
|
H&R .45 Colt Carbine, NEF 20 Gauge Pardner w/screw in choke, H&R .22LR Sportster, H&R Versa Pack .22LR/.410 Shotgun.
|
|
|
dpe.ahoy
GBO Supporter
Trade Count:
( 1)
Senior Member
Offline
Gender:
Posts: 2301
|
|
« Reply #26 on: September 30, 2009, 07:25:05 PM » |
|
Oh, yah. 454 Casull would be good  . DP |
|
|
|
|
Logged
|
Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 3-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, 45/410, AND 38-55; Levers-Marlins:357, 30-30, 2-35Rem, 444P, 338Marlin Express, 38-55 CB, 45-70 GS, XS7 7mm08; BLR's:7mm08, 358Win; Rossi: 2-357mag, 44mag, 2-454 Casull; Winchester 45Colt Trapper; Bolt actions, too many; 22's, way too many. Who says it's an addiction?
|
|
|
krod47nw
GBO Supporter
Trade Count:
( 124)
A Real Regular
Online
Gender:
Posts: 797
|
|
« Reply #27 on: September 30, 2009, 09:25:49 PM » |
|
I need the casull too.  Kevin |
|
|
|
|
Logged
|
|
|
|
krod47nw
GBO Supporter
Trade Count:
( 124)
A Real Regular
Online
Gender:
Posts: 797
|
|
« Reply #28 on: September 30, 2009, 09:27:05 PM » |
|
I don't know if anyone is ahead of me for the MAX reamer, but how do I get on the list?
Kevin
|
|
|
|
|
Logged
|
|
|
|
eddiegjr
GBO Supporter
Trade Count:
( 0)
A Real Regular
Offline
Gender:
Posts: 726
|
|
« Reply #29 on: October 03, 2009, 09:38:00 AM » |
|
What about having a show and tell, instructions or a school at some event like the prarie dog shoot or some other event to instruct some of the techniques in the FAQ's. I would be willing to pay a fee for the schooling if I could get to the event. A lot of the concepts are not easy to visualize, I am a learn by hands on doing type. eddiegjr
|
|
|
|
|
Logged
|
St Judes Childrens Research Hospital
|
|
|
|
