Dan Wesson Pics - Post'm if you got'm

[RollTide]

If you have posted pics in other threads, please repost them in this "sticky" thread.

If you have new pics of your Dan Wessons, please share them with us.



My blue 44 mag and my stainless 445 supermag.



Next a little closer look at the 4" 445 supermag



Next my 445 supermag with the 4" compensated barrel



Finally, my 6" 445 Supermag in the case with my scoped 8" barrel

[David Carey]

My 445 with the 10" scoped barrel also have an 8"VH barrel. I never get tired shooting this at the range.





Dave

[darrell8937]

http://i37.photobucket.com/albums/e97/darrell8937/DWModel15.jpg
http://i37.photobucket.com/albums/e97/darrell8937/ScopedDW.jpg

[mg66]

DW Model 15 .357 Mag originally had a 4" barrel. I bought the 6" to give a little more accuracy for target shooting and hunting.

[RollTide]

Here are some pics of a very unique gun.  Pics courtesy of Travis.

Thanks for sharing the pics Travis.

Roll Tide

[Feldhege]

I have a 2 Monson DWs

One in 357 with 4", 6", and 8" Barrels and the other in 44 Mag with a 4", 6", and 8" barrel.



Robb

[GRIMJIM]

two wessons 1- 357 pistol pack with 2, 4, 6, 8 inch barrels, and 1-44 with 4, and 8 inch barrels

[dougk]

The pictures of the 44 mag  and 357 mag do not do justice to the grips...

Both 44 mag and 357 mag




The 44 Mag




The 357 Mag

[DWTim]

.375 SM (now with removable barrel!)



Model 40 (.357 Maximum)



Model 12 PP (My favorite shooter)

[DWTim]

Blaserman, can you fix the link on that image? I can only see the thumbnail, and I sure would like to see those beauties up close.

[Paul5388]

Here's a picture I took today.  6" ported DW 744 with a 1X30 Red Head red dot on a B-Square base.  It weighs 69.5 ounces empty.

[RollTide]

Paul,
That looks a lot mike my hunitng rig, except my 44 is blue and I have a Bushnell handgun scope on it.  My scoped 6" 44 has put 6 shots into 2 cloverleafed 44 caliber holes from a rest at 25 yards.  It is so accurate it is scary.  I really like your stainless 44.  I wish my blue one was stainless, but I already have all the extra barrels (5) in blue, so I would have a lot to replace to change over to stainless at this point.

Thanks for the pics.  I am glad to see more people posting more pics.  Keep'em coming guys.

Roll Tide

[BLASERMAN]

  Can't figure out how to post pictures right , they are burry or too small .

[Paul5388]

Roll Tide,

I am using the 6" ported instead of my 8" barrels just because I will probably use 240 gr Magtech JSPs for hunting and I like to shoot cast once in a while.  Cast is a little bit of a problem with a ported barell, unless you clean often, so I can use the unported 8" with cast and still have the 6" dedicated for jacketed bullets.  A friend in MS, kinda in between us, is converting a front sight to neon green for me for the 8" shroud.  I just can't see the white, red and yellow colored inserts I have now, so hopefully the green will help.

As soon as I can get around to it, I'll post a new picture of my 6" 715.  I'll put the neon green on it and maybe I can get it to show up.

Blaserman,

I use Irfanview to work over my photos.  It's a free download at www.irfanview.com  Most of the time a 640X480 picture will fit most screens.  Then you just have to set the degree of compression to get the file small enough.  If you right click on the picture I posted and select properties, you will see the actual size of the photo and file size I posted.  I try to keep my file sizes under 50K for slow dialup users, like me.  Natural light does help reduce glare from the flash going off.

[Paul5388]

As promised, here's my DW 715 with a newly converted red ramp front sight.  The sight was "painted" with a white base color and then coated with neon green (Birchwood Casey Super Bright Touch-up Sight Pens).  The original color inserts I have (Yellow, Red and White) have just gotten to where I can't see them any more, so I decided to try Neon Green.  The only thing I did when it got here was to color in the red insert on the sides.  I just didn't like displaying Christmas colors!

[Paul5388]

I'm not the greatest photographer and sometimes my efforts verify that! 

Here's a picture comparing my 744 with a 6" ported shroud (look closely and you can see the port about 1/2" back of the front end of the red dot base/mount) installed and a 715 without ports.  On the right side, there's an 8" ported shroud next to an 8" non-ported barrel and that's next to an 8" ported barrel.

[BLASERMAN]

I have ^ Dan Wessons to show as soon as I figure out how.

[Tycer]

[Tycer]

[RollTide]

Tycer,
Great looking pistol pack.  Thanks for posting.

Roll Tide

[Van/TX]

Here's mine ...Van

[smocum]

Hello everyone..First post here..so I'd thought I'd post a pic.

This is my DW 15-2 with a snubbie barrel.  I've own this gun for 28 years.

Through the years this gun has served me well as personal protection as well as an excellent target shooter.

I will never sell this gun and will hand it down to my son someday so he can enjoy for many years.

I still have the original DW retail price list dated April 1, 1978 which lists all the revolvers and accessories.

I'll see if I can figure out a way to scan and post it on the forum here in case anyone would like to use it for reference purposes.

[Steel Shooter]

A 4" big bore (445 SM) backup - new and never used, which I must now part with.

[salvo]

Here are my three Dan Wessons
Top .22
Middle 357 Super Mag
Bottom 445 Super Mag
(All Monson Guns)

[BLASERMAN]

Can and will someone post pictures for me if I send them an email .
I sill have not figured out how to post a good clear picture of the right size.

[BLASERMAN]

 Heres my Dan Wessons   44 mag           .22                            375 Super mag

                                      41 Mag                                              357 Super Mag

                                        32-20                   357 mag                         445 Super Mag

                                   

                   http://i35.photobucket.com/albums/d177/blaserr93/Picture069.jpg

[GRIMJIM]

Wow blaserman, that's a nice collection.

[BLASERMAN]

Still looking for a .414 and a .45 colt one.

[wouter83]

He guys,

Here's my DW model 15 with 6" barrel.




Here it is in a bigger size.
http://static.flickr.com/101/291593594_bf6afddaf6_b.jpg

The poor quality is due to the fact that I only have a cameraphone, and not a real digital camera.

greets, w.

[old geezer]

Here one my family got me for Christmas last year. Monson model 357, five digit serial number. I've never seen another pair of grips like these.  Does anybody know anything about them?