Update: The trigger has two plungers with sears on each. One for the bolt and one for the actual trigger. Two are needed for the "Click-Clack" action. I took the trigger apart and installed lighter springs on both plungers. I also polished the sears and sliding parts of the trigger. The resulting trigger pull was definitely lighter and smoother, however the action would not operate properly. Kept getting jams and failures to ****. I put the original trigger springs back in and full function returned. The trigger now is still very long, two stage, but it is a bit lighter due to smoothing parts. It is way smoother and not gritty, but nevertheless a poor trigger.