|Topic Review (Newest First)|
|05-26-2020 08:11 AM|
Purebred, I read through this thread in a hurry but didn't see exactly what you were plans were for the 10mm. If it's deer sized animals and boiler room shots then you Glock 22 will not let you down! The biggest corn fed doe that I have ever killed was killed with my Glock 22 and 165 JHP ammo. I got a complete pass through and a wide short blood trail. She was the first of several with that gun.
I've killed a lot of deer with handguns over the last 35 years and have come to learn that shot placement trumps caliber. Bad Mike from this forum has put me onto a 200 grain cast load for my Gp100 357 and that is what I plan to use going forward.......I hate chasing brass! Ha!
|05-26-2020 06:00 AM|
I picked the G40 specifically due to the barrel length and capacity. My use is a carry pistol for dispatching feral hogs. We have big issues with them in the area of our small farm and occasionally they are jumped up while we are out doing fencing or mowing, and sometimes just walk out at the wrong time.
With the longer barrel it give a longer sight radius which is a plus on a 50yd or longer shot. I topped mine with a Burris Fastfire and from a decent rest have no issues holding groups small enough for hogs. Using 180gr Gold Dots at 1300fps provides plenty of punch to reliably put the smack down on them.
My first 10 was the IMI Javelina and it has many to its credit but I just wanted something different. On the 40sw, just never warmed up to it, sorta like 38's vs 357's.
|06-02-2019 02:37 PM|
|Shootall3||Back to the 40 in a 10 mm barrel. If a 40 gets by the extractor you are out of luck . In a 40 chamber it corrects itself and who knows ?|
|03-06-2019 10:28 PM|
|plumberroy||I didn't buy 40 cal to shoot through my 10mm's I wanted a 10mm Glock 20 gen 4 fit the bill of my want. At that time Springfield didn't make an XD in 10mm. I sold one XD40 to a friend put that money towards a G17 . I like to have any ccw gun I carry to have the same controls. So I decided to switch to glocks. When the last XD40 went I had 2-300 rounds left. I had read the 10mm glock would run them so I gave it a try. I ran 150 through my G20 without a single malfunction . They shot half way accurate. When I bought the 29 I ran 125 rounds through it same results. I have no plan to buy more 40 S&W to shoot in my 10mm's, but would not hesitate to load up 40's if I needed ammo and it was all I could get. Honestly I only carry my G29 for going down town or for security at church. If I am not at work I have to glock 42 on me if I am upright. That gun performs way above where it should for size and caliber|
|03-05-2019 09:27 PM|
Originally Posted by Shootall3 View Post
|03-05-2019 08:43 PM|
|Shootall3||FWIW I shot a IDPa match with a G19. Last round sounded light. When I cleared the gun it had not ejected the case. The bullet went thru target sideways. It was a 380. Woops. But it shows how generous some guns are with working.|
|03-05-2019 07:28 AM|
might be a valid argument for factory ammo but if you trim to minimum length your case mouth on a 10 isn't going to headspace if the chamber is set for factory length ammo. Ive yet to see one with a self adjusting headspace feature. Well I shouldnt say that. they do have extractors. If brass trimmed to min length did headspace youd have problems chambering factory would never chamber. Just about all semi auto handguns have pretty generous chamber dimensions to insure reliability. I guess if a guy wanted to win an argument he could take a cast of his chamber and sort brass and trim some brass to fit it exactly at least for one firing anyway. Now a 40 or 10mm in a ruger single action sure does have to headspace on the rim. Its way ammo for one has to be made so carefully or you will get misfires. No extractor. I don't know how many 10s of thousand rounds ive shot through glocks M&Ps sigs berrettas ect and ive yet to break one extractor. Bottom line is like I said most chambers are cut so generously that you can pick mixed brass off the ground at the range and it runs just fine with never seeing a trimmer. I have shot 40s in my 10s and everyone of them has gone bang. that said I just did it to say it could be done. I wouldn't make a habit out of it because your going to get crud build up and possibly even flame cutting in your chamber and in at least my guns they never shot near as good as the 10s did anyway. .
Originally Posted by rosewood View Post
|03-05-2019 07:07 AM|
Originally Posted by Shootall3 View Post
|03-04-2019 09:44 PM|
Originally Posted by plumberroy View Post
|03-03-2019 05:34 PM|
|plumberroy||As far as as the original question. I carry my G29 way more than my G20 but I don't get to bum around the woods as much as I used to. I carry the 29 concealed often.|
|This thread has more than 10 replies. Click here to review the whole thread.|