|Topic Review (Newest First)|
|05-04-2020 04:36 PM|
|stringofpoloponies||TC/ flex capper. its my go to.|
|04-27-2020 12:20 PM|
This here's the one that I use:
|02-11-2020 07:16 PM|
|toytruck||I use a T/C dogbone 209 capper. It works great with no issues still to this day.|
|02-07-2020 10:39 AM|
I use the TC inline capper holds around 7 or 8 209 primers and very easy to use this is the one I use
|02-06-2020 08:03 AM|
The leather one home made would not work well at all for mutiable shots in my Remington 700's.
I have the CVA one in the link yes some times the pry bar part comes in handy but the rest of it for me sucked.
For me the TC clear view capper works the best.
|02-04-2020 08:25 AM|
Bought mine when it was marketed through Winchester, but it looks like CVA has the exact same one. However, the reviews of the CVA do not seem too good. My Winchester works pretty slick using Winchester 209 primers in it.
The retractable pry bar is invaluable in removing the primers from my smokeless conversions since the primers fit so tight as not to leak.
|02-02-2020 03:54 PM|
|Fyrstyk||Why not just use a 1/8"thick piece of leather and punch primer size holes about 1/16" in from the edge of the leather, then cut a slit with a razor blade from the edge of the punched hole to the edge of the leather. To operate, just place the primer in the hole and pull sideways to release the primer. I have made similar cappers for #11 caps.|
|02-02-2020 01:05 PM|
What primer tool (carrier, capper) have you found that works well with 209 primers. Thank You