Graybeard Outdoors banner

1 - 9 of 9 Posts

·
Registered
Joined
·
153 Posts
Discussion Starter #1
What primer tool (carrier, capper) have you found that works well with 209 primers. Thank You
 

·
Registered
Joined
·
122 Posts
Why not just use a 1/8"thick piece of leather and punch primer size holes about 1/16" in from the edge of the leather, then cut a slit with a razor blade from the edge of the punched hole to the edge of the leather. To operate, just place the primer in the hole and pull sideways to release the primer. I have made similar cappers for #11 caps.
 

·
Registered
Joined
·
1,190 Posts
Bought mine when it was marketed through Winchester, but it looks like CVA has the exact same one. However, the reviews of the CVA do not seem too good. My Winchester works pretty slick using Winchester 209 primers in it.

https://www.midwayusa.com/product/1002217627?pid=263956

The retractable pry bar is invaluable in removing the primers from my smokeless conversions since the primers fit so tight as not to leak.
 

·
Premium Member
Joined
·
5,142 Posts

·
Registered
Joined
·
324 Posts
I use a T/C dogbone 209 capper. It works great with no issues still to this day.
 

·
Registered
Joined
·
856 Posts
What primer tool (carrier, capper) have you found that works well with 209 primers. Thank You
 
1 - 9 of 9 Posts
Top