Graybeard Outdoors banner

1 - 4 of 4 Posts

·
Registered
Joined
·
112 Posts
Discussion Starter #1
what a fun gun. Well for the question my son and I are looking for loads for this set up now that we shot 100 rounds throug it we still need to polish chambers as a couple will not lend them selves to easy extracton. we had to pop the cylinder out and use a cleaning rod. Mostly with the mag tech stuff. PMC shot fine just one cylinder was sticking with it. As you know I do have a wide varity of cast bullets at my disposal. so that is no problem.
 

·
Registered
Joined
·
320 Posts
Yes, I have one of these fine pistols, too, and my handload is the Hornady 100gr SJ over 12.00 gr 2400. Shoots fine, not as hot as the milspec hardball loads. I use Small Pistol primers in this load.

Tom
 

·
Registered
Joined
·
56 Posts
I shoot alot of 30 carbine in the TC for HP/FP silhouette. I use the RCBS 30-115 over 4.5 grs. 231 about 1080 fps. Make a great lite or practice load,and cheap to shoot.
Mugs


Shoot only cast!
 
1 - 4 of 4 Posts
Top