[TargetSeeker]

SEK..22Hornet sent me my order and I received it today. I’m lost for words on the quality of these pieces. Honestly it’s true craftsmanship at its best. I can’t wait to get them on the rifle. All I can say is Thank you Thank You ! I really got my money’s worth!

 

[Superslickie]

The anticipation of getting these pieces for my huntsman is killing me

 

[Indianaturkeyshooter]

Ok - pricing - the trigger guards are $75 each plus $7.50 per order Priority Mail postage. If you want a set - that is $100 plus $7.50 postage. I can get 3 or 4 sets into the small flat rate box. I hope to keep a few in process so I'll have some on hand. Here they are installed on my 45LC Carbine. You can contact me at dr dot cation at gmail dot com (replace the "dot" with . with no spaces). That is not my paypal email, by the way -

Are these parts still available? If so i would be interested in getting a set in 12 gauge for my HR sportsman long range

 

[cj71984]

Hello, I’m interested in a purchasing 4 sets of your Brass Trigger Guards and Spacers. Are they still $100 plus $7.50 postage? My email is [email protected]. Thank you.

 

[SEK_22Hornet]

Just sent you an email. Price of metal has gone up quite a bit so I have raised my price.

 

[Boulder350]

Looking to add a brass TG and spacer to my Buffalo Classic too. Have spent the last hour trying to figure out how to PM SEK_22Hornet with no luck. Any help would be appreciated.

 

[quickdtoo]

He'll contact you, newbies can't send PMs until they are 10 days registered and have 10 posts, anti-spam/scam measures.

Tim

 

[bubbaanthonybasham]

I have a topper 10 gauge, plastic trigger guard is cracked in 2 places I’ll take a set, trigger guard and forearm spacer. My email is [email protected]

 

[SEK_22Hornet]

I have a topper 10 gauge, plastic trigger guard is cracked in 2 places I’ll take a set, trigger guard and forearm spacer. My email is [email protected]

I'll send you an email with my information. I need to check to see if I have a forend spacer that will fit the 10 gauge.

 

[SEK_22Hornet]

Is anyone going to the Tulsa Wanamaker's gun show this weekend? I plan on being there. I won't have a table but may be able to talk another guy I know into letting me have a little space for some brass parts. I plan on taking a few sets with me just in case. I'd love to meet anyone from the forum that happens to be going!

 

[SEK_22Hornet]

Oh - by the way - I have actually made progress on the brass Huntsman barrel band. I hope to have the fixture built in the next two or three weeks and have a prototype soon after that. I'll post photos of the first one I complete.

 

[bubbaanthonybasham]

I'll send you an email with my information. I need to check to see if I have a forend spacer that will fit the 10 gauge.

Awesome thank you

 

[eevans]

Do you make trigger guards and forend spacers out of steel?

 

[SEK_22Hornet]

Do you make trigger guards and forend spacers out of steel?

I do not currently make any steel parts. Toth Tool used to make spacers but I do not know if they still do. I don't know of anyone else doing trigger guards in any other metal.

 

[eevans]

I do not currently make any steel parts. Toth Tool used to make spacers but I do not know if they still do. I don't know of anyone else doing trigger guards in any other metal.

How can I place an order for a brass TG and spacer set?

 

[SEK_22Hornet]

I'll send you a message.

 

[ncsHR2000]

I have gotten a steel spacer from Toth Tool before but I just checked and they are out of stock now. The only place that I have found a steel trigger guard was on Fleabay and the one that I have will have to be drilled for a larger rear pin as it was made for 2 small pins.

 

[SEK_22Hornet]

The other option to get a steel trigger guard would be to 3d print it. That option is available on my Shapeways store. You can get a matte finished steel trigger guard printed there from my 3d model. Here is a link to the trigger guard. It is actually not too bad a price compared to the brass. However, the spacer won't print in steel - they have tried and it fails. The sharp edge won't survive. Trigger Guard for H&R (updated) by SEK22Hornet on Shapeways

 

[Brian Chrysler]

Hi Dan,

Just purchased a never fired H&R 45-70 Buffalo Classic a guy had in his safe. I understand you make terrific brass trigger guards and forearm spacers for them. Looking to replace the plastic bits. Is that all of the plastic on or in them? My email is [email protected]

Would you be willing to make me a set would you have a set already made? I live in Ontario, Canada, so hopeful you would be willing to ship them to me. I would appreciate a great deal. I understand these parts are legal to ship here.

Thanks so much for your consideration,
Brian


Ok - just a quick update - I finally feel like these are coming along like they should - I have worked out most of the details to produce them as efficiently as I can. Ran 5 this afternoon. Finally have a pretty decent way to sand them. I guess I'm trying to say that if you want one, get in touch with me - I have sold several already - shipping a pair out tomorrow to a Graybeard member. Here are some pics of the set going out tomorrow and some in process.

 

[SEK_22Hornet]

At this time I cannot ship to Canada except through an export broker, I am working on getting these parts classified by the Commerce department. Hopefully they will be classified as exempt which will open the door to me shipping to Canada directly. Digging through all the legal mumbo jumbo is pretty confusing to say the least!