Graybeard Outdoors banner
1 - 4 of 4 Posts

· Registered
Joined
·
116 Posts
Discussion Starter · #1 ·
Any problems w/ lead bullets in the 454? As I am not yet into casting my own, I would appreciate any tips on good sources of lead bullets that can withstand the velocities of the 454. I am using D&J cast bullets now. They advertise that they are good up to about 1300 fps so I am loading on the light side to accomodate this.
 

· Administrator
Joined
·
25,947 Posts
I push that 325 grain of Billy's to 1550 fps in my RB .454 Casull and that's not really a max load but it super accurate there so I don't see the need to push it any faster. That's become by favorite bullet and favorite load for the .454 Casull.

GB
 

· Registered
Joined
·
116 Posts
Discussion Starter · #4 ·
Thanks. Any tips on where I can find these? Also, I am trying to figure this gas check thing out. I have seen some of these at Midway. A copper disk that is cast into the base of the bullet?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top