Graybeard Outdoors banner

1 - 20 of 22 Posts

·
Premium Member
Joined
·
2,191 Posts
Nice enough gun but do wish they could keep the safeties off of hammer guns though. Betcha it has something to do with dodging Lawyers trying to get more money.
 

·
Premium Member
Joined
·
6,016 Posts
yep, there's the thread. thanks tim.

now , one of us needs to buy this firearm and see what its all about.

it would be interesting to know if a handi barrel would fit on it cleanly or at all ..
 

·
Premium Member
Joined
·
6,016 Posts
nice find Vash..
they sure do look like handi clones.. china copies , but they look a bit rough
 

·
Registered
Joined
·
1,766 Posts
Scibaer said:
nice find Vash..
they sure do look like handi clones.. china copies , but they look a bit rough
Well you just throw and authentic action in some wet sand. pound the sand till its firm. cut in half remove action. place the two halves back together and fill with wax. Let the wax cool, remove from said sand. Ceramic coat the wax, let dry. Pour hot pot metal in, melting the wax out. Drop on the concrete floor till the ceramic coating is all off and your good to go!
 

·
Registered
Joined
·
1,766 Posts
jpshaw said:
The old lost was process - huh Vash?
One of the commercial customers I work for makes turbine impellers for jet engines. That was the process they used. Electric induction furnaces melting a nickle alloy. Damn hot in there. Would have liked to take pictures but they were owned by a German company.
 

·
Moderator
Joined
·
9,530 Posts
Vash said:
One of the commercial customers I work for makes turbine impellers for jet engines. That was the process they used. Electric induction furnaces melting a nickle alloy. Damn hot in there. Would have liked to take pictures but they were owned by a German company.
 

·
Registered
Joined
·
949 Posts
http://www.gunbroker.com/All/BI.aspx?Keywords=pointer

some of the other versions (so far), maybe there is more, a 28 gauge single barrel would be interesting...


The O/U show less weight in the smaller gauges:


KPS1012F28 12 Over/Under Wood Finish, Silver Receiver, 3" 28" 7.5 lbs Multi-5 $664.00
KPS1020F28 20 Over/Under Wood Finish, Silver Receiver, 3" 28" 7.0 lbs Multi-5 $664.00
KPS1020FY26 20 Youth Over/Under Wood Finish, Silver Receiver, 3" 26" 7.0 lbs Multi-5 $664.00
KPS1028F28 28 Over/Under Wood Finish, Silver Receiver, 2.75" 28" 7.0 lbs Multi-5 $664.00
KPS10410F26 .410 Over/Under Wood Finish, Silver Receiver, 3" 26" 6.0 lbs Fixed $664.00


But the single barrels don't:

KPS12BA028 12 3" Synthetic 28" 4.8 lbs Fixed $188.00
KPS20BA028 20 3" Synthetic 28" 5 lbs Fixed $188.00
KPS410BA028 410 3" Synthetic 5.4 lbs Fixed $188.00
 

·
Registered
Joined
·
1,916 Posts
Darto said:
Very Very interesting !

(Chinese cleverly came up with Leg Pointer for a catchy gun name title? Why I don't know ::)
I hope it means Leg. (As in short for Legacy) Pointer and not Leg Pointer, I don't want one pointing at any legs, mine or otherwise! Sure don't want to use my leg to point it. . .

BW

Sent from my SM-G900V using Tapatalk
 

·
Premium Member
Joined
·
9,385 Posts
Will the first person to try a Handi barrel on one please report back....<><....:)
 

·
Premium Member
Joined
·
7,980 Posts
is it an sb1 or sb2??
 

·
Registered
Joined
·
1,663 Posts
Mistaken post...
 

·
Registered
Joined
·
1,766 Posts
There was a Poly Technologies .410 parts kit on GunBroker. It should be here next week. Ill let you know if the barrel fits.
 
1 - 20 of 22 Posts
Top