Graybeard Outdoors banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
3,065 Posts
you can get a neck sizer from redding. I was using a 30/30 neck sizing die and it worked well. hornady and rcbs will custom make a neck sizing die for you for about $20 or so
 

·
Registered
Joined
·
112 Posts
Neck dies

I just purchased the Hornady 30 cal short neck die for my 30 herrett and it works great. Minimal lube and effort needed. Not sure how many shots you can go before you have to full-length though. Inexpensive, too, under 20 $
 

·
Registered
Joined
·
2 Posts
Lyman Dies

I have a set of lyman dies that i got when i purchased my used contender. The lyman dies that i have ( am not sure if this is original) are in a three die set. There is a fl die, ns die, and a seater. The neck sizer is nothing more than a 30 caliber rile plug sizer. I looked at lyman's site but they do not list this set any longer.


D
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top