Graybeard Outdoors banner
1 - 1 of 1 Posts

· Registered
Joined
·
286 Posts
A couple of things that I've done to a new 760/7600 is to run some dummy rounds through them to slick them up and see where the wear points are. I make up the dummy rounds with a case, no powder, a pencil eraser in the primer pocket, and a Remington pointed Core-Lokt bullet. I load them in the magazine(s) for the rifle and run them through the action by dry firing. After a couple hundred rounds of this activity, you will see bright spots at the wear points. I then lube those bright spots with Moly Slide. Using this process, I've never had a problem with any of my pumps in cold weather.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top