Graybeard Outdoors banner

Problem with extraction on Encore

3K views 5 replies 5 participants last post by  Ruga Booga 
#1 ·
I just put my TC 7-08 bbl. on my Encore receiver. Thought I would work on some loads with the S.W. Precision powder I just received about a month ago. Big problem , cartridge jumps over the extractor 9 times out of 10. About half the time even without firing. If I push the extractor forward all the way before loading, it will usually lift cartridge out after closing if not fired, but then if fired , no extraction. Case is not stuck, pushes right out with rod. Anyone got an idea I might try so I don’t have to send barrel back? Got the barrel about a year ago & only fired it half a dozen times, then put 308 barrel back on. Don’t remember problems then.
 
#5 ·
Well! I got my Encore extracting problem fixed today. So simple I can’t believe nobody on this site could tell me how to fix it. The extractor spring is just a plain curved flat spring, simply remove, bend a little more arch & reinstall. Easy 2 minute job.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top