Graybeard Outdoors banner

1 - 5 of 5 Posts

·
Premium Member
Joined
·
3,916 Posts
Discussion Starter #1
Does any one know if you can get replacement elastomer rings for the Lee Pro Auto Disk? I tried finding a contact link on the Lee website. Maybe I'm blind - if you know of a way to reach them by email I'd appreciate it.

I've had good luck with this unit for years - with a tiny bit of leakage with AA powders and other fine ones. But last night I noticed that I was getting more leakage than usual with H110. Also with Lil Gun.

thanks
 

·
Premium Member
Joined
·
3,916 Posts
Discussion Starter #2
oops

I went back to the Lee site and dug more. Went into the FAQ section and sure enough if you go thru there and don't find quite the answer you need, there is a hot link to email them.

sorry for taking up space here. Should have looked harder.
 

·
Registered
Joined
·
4,551 Posts
Lee's web site is not that user friendly! The owner's manuals leave a lot to be desired as well.
Savage
 

·
Premium Member
Joined
·
3,916 Posts
Discussion Starter #5
thank you jglar! I did get an answer from Lee CS but they were directing me to the whole ProAuto upgrade kit! I'll look for the part you suggest.
Lee also suggested filing down the riser a little and I'll try that first.

thanks again. I get so much good info off GB!


Dan
 
1 - 5 of 5 Posts
Top