[Old and grumpy]

You may need to do a little fitting on the spring. It can be done with a stone or dremmel. There are tricks.

 

[Old and grumpy]

Don't know what you have but you will need these tools. Black Powder Revolver Starter Kit With Wonder Lube Components --- These cost a lot. but cap drop is a big issue and these fixed one of mine that would drop 3 of 6. Well worth the money. Put it in the gun or in my wifes swear Jar! -- Nipples. When you clean use the dental pick you find at the tooth brush isle. Nips must be dry inside and out. Even if you wipe them any trace of oil will kill the cap. Use a small drop of anti seize on the nipple threads. Birchwood Casey choke tube lube is good. Nice size tube. Same stuff you buy at the auto parts by Perma Tex.

 

[Old and grumpy]

Sorry link for the nipples AMPCO Revolver Nipples

 

[Old and grumpy]

Yes. I know some call them cones not nipples. When I her cones I see Madonna's album.

 

[1Longbow]

Do you recommend that nipple wrench that comes with the kit?

 

[Old and grumpy]

it will do the job fine.

 

[Old and grumpy]

Any luck with the spring?

 

[1Longbow]

Well I had to put a new hand in it also. So far the timing is good and the cylinder rotates and locks up. I'll have to wait to go shoot it ,as its so dry out here and fire restrictions have been put in place. I don't want to be the guy that sets off some fire. Thank you for all your help. Waiting for the monsoons to kick in next month ,so I can see what it will do. Thank you again for your time and knowledge!!