Graybeard Outdoors banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,428 Posts
Generally since the scope mounts directly to the barrel and all barrels are the samee diameter in that area you can figure the same for all Contenders. The important parts of the equation are objective diameter of the scope and the style of mounts/rings. Typical 38-44 mm scopes without AO can use medium rings.
 

·
Registered
Joined
·
1,053 Posts
I always use the lowest rings that will allow the 'scope to be mounted on whatever I am putting it on. The closer to the bore the better the line of site. High mounts require too much angle to get the bullet to impact at, say, 100 yards. Then the bullet doesn't come back to point of aim for a considerable distance. I use low whenever possible...

Good-luck...BCB
 
1 - 7 of 7 Posts
Top