Graybeard Outdoors banner

1 - 2 of 2 Posts

·
Registered
Joined
·
276 Posts
Discussion Starter #1
Hello : I would like to get away without using the Burris high Zee rings with my Bushnell trophy scope 3x9x40! Would medium ZEE ring work without a hammer problem? Or would the quadlock weaver ring work better!I have not quite a 1/4 inch with high zee rings!I would like to lower a little lower than the high zee rings with the use if the trophy scope! Just tell me the rings that will work with that Bushnell scope! Thanks Dale
 

·
Super Moderator
Joined
·
51,245 Posts
Good luck with that, the Trophy has a huge power ring, makes mounting in anything but high or extra high rings without hammer mods real hard to do. I have the Trophy on my .405 Win Target, the hammer has been modified to allow the scope to be mounted in low Leupold QRWs. If you have a dremel, the hammer can be easily modified, see the FAQs and Help sticky on the topic, there's also a current thread in the Centerfire forum on the same subject. ;)

Tim

http://www.myhostedpics.com/images/quickdtoo/tdctrophy_1.jpg
 
1 - 2 of 2 Posts
Top