Joined
·
69 Posts
I have a set of Simmons scope rings that are slipping on my 7mm08. Is there some kind of tape or spacer that I can put in them to stop this problem??
Any other Ideas?
Thanks
Any other Ideas?
Thanks
Slipping Scope rings
1 - 4 of 4 Posts
Joined
·
25,953 Posts
Can I safely assume that what is slipping is the scope moving in the rings as opposed to rings moving on base?
If so, I'd suggest lapping the rings. You can put just a slip of paper in there or even double sided tape but if they are lapped to where they fit properly that usually is a proper cure and at the same time makes sure they are aligned closely enough to not be damaging the scope.
GB
If so, I'd suggest lapping the rings. You can put just a slip of paper in there or even double sided tape but if they are lapped to where they fit properly that usually is a proper cure and at the same time makes sure they are aligned closely enough to not be damaging the scope.
GB
Joined
·
452 Posts
slipping scope
Burris claim their signiture rings with the plastic inserts will not slip. I have a few sets and they work real well. I use the dual dovetail for a stronger setup and they don't markup your scope.
Burris claim their signiture rings with the plastic inserts will not slip. I have a few sets and they work real well. I use the dual dovetail for a stronger setup and they don't markup your scope.
Joined
·
69 Posts
Thanks
Thanks for info. I put black tape on them for know and it seems to have stopped the problem. I will probably purchas some different rings after hunting season...............
Thanks for info. I put black tape on them for know and it seems to have stopped the problem. I will probably purchas some different rings after hunting season...............
1 - 4 of 4 Posts
