Graybeard Outdoors banner

1 - 13 of 13 Posts

·
Registered
Joined
·
1,283 Posts
Discussion Starter #1
they came in today and that is much sooner than expected.all $1800.00 worth of these lee molds are sitting in my back room. :lol: i will start making out the shipping labels and will tape the Lee mold boxs up for shipping.i expect to have them allready for shipment in the next couple of days for all that ordered one or two. :D

keep a look out for your mold :mrgreen:
 

·
Registered
Joined
·
1,283 Posts
Discussion Starter #2
the molds are now ready for shipment :mrgreen:
18 molds are being shipped after work tomorrow(July 27th) and the other 18 molds are going to be shipped out after work on (July 28th) :mrgreen:
 

·
Registered
Joined
·
1,145 Posts
Yee Haa :-D :grin: :) :grin: Now I just got to get a set of handles. Way Cool!!!!!!!

Thanks for all your work Jeff :D
 

·
Registered
Joined
·
1,283 Posts
Discussion Starter #4
i hear you John.i need a set of handles,a sizer,some wheel weight lead and some gas checks and some lube and some of this and some of that :shock:

the mold deal went down kind of fast but im glad it did.im not looking forward to going to the post office with all the packages to ship.i just hope its not real buisy in there with a big line up behind me when they are weighing up all my packages :-D
 

·
Registered
Joined
·
1,283 Posts
Discussion Starter #5
to all of you that ordered a mold.i changed my mind about shipping half the molds out today and half tomorrow :devil2:

i shipped them all out today :mrgreen:

enjoy your new boolit molds :toast:
 

·
Registered
Joined
·
769 Posts
jeff223 said:
i hear you John.i need a set of handles,a sizer,some wheel weight lead and some gas checks and some lube and some of this and some of that
Hey, Jeff, I'll give you 20lb of WW if you give me 10lb of bullets. I'll even loan you my Lee handles.
 

·
Registered
Joined
·
1,124 Posts
:agree: :blaster: :blaster: :blaster: Good man Jeff! Now I got to get set up....hopefully pretty soon.... :wink:
 

·
Premium Member
Joined
·
96 Posts
Jeff. I got my mould today arrived safely. Anyone looking for Leee six cap. handles Midway has them on Aug special for $11.39. Thanks again Jeff.
PS if you get that reamer thing for the .445 super max count me in. Bob
 

·
Registered
Joined
·
1,283 Posts
Discussion Starter #10
im glad you got your mold Bob and i hope it works good for you.i have a 44mag contender barrel on its way and im going to shoot it with 44mag ammo first.if it shows signs of being a good shooter a reamer will be in order.i will post something about the 445 super mag reamer sometime soon.the 445 will make a great heavy hitter in the contender and in the handi rifle
 

·
Registered
Joined
·
1,124 Posts
Got my mold yesterday (thanks Jeff223!) and ordered a furnace,handles and dipper today....now to locate some lead...hope I like doing this... :? just what I need something else to spend money on that I won't have time to fool with.... :-D :-D
 

·
Registered
Joined
·
1,145 Posts
Got my mold yesterday. Was looking at it closer this morning and it needs a realy good deburring, more so than single or double cavity Lee I have ever used. Before you guys go dumping lead into 'em, get yourself some magnifying glasses (I need 2x these days for this) and examine all the edges of the cavities and remove the burrs. This can be done with an Exacto knife (Don't dig or cut, use it to lift and flip the burr) some use pencil eraser. Over at www.castboolits.gunloads.com/ there is an article on deburring new molds. Click on the "Check out the articles" line/link and you will find the info there. Failure to do this before casting will cause a lot of headaches.

Edit: fixed link
 

·
Registered
Joined
·
1,124 Posts
Thanks for that advise JPH45!! I being a complete newbie to this would have just smoked them and ran with it....got my furnace and some ingots and handles today.....now to find some time to do it...got company for two weeks.....if I get hung up can I PM ya for advise?? :roll:

P.S. I just love Midway...ordered it on Tuesday afternoon and got it this morning in my hands...I've actually gotten two days turn around before...depending on when ya place the order.... 8)
 
1 - 13 of 13 Posts
Top