Graybeard Outdoors banner
1 - 6 of 6 Posts

·
Registered
Joined
·
739 Posts
Discussion Starter · #3 ·
Mainspring

My stock one looks pretty hammered, Also the frame is getting hammered. Bought the gun used, so i dont know exactly how many shots through it, but im figuring its alot. The wolf hi= power is 1# heavyer than stock i believe. Thanks- Tad
 

·
Registered
Joined
·
1,796 Posts
Wollf springs are generally very good, I 've used them on 45 Colt & clones. If things are looking hammered, you should consider seeing a Glock armorer, chances are, you won't regret it. :D
 

·
Registered
Joined
·
4,551 Posts
I'm sure the recoil spring is the one in question here. I replace the recoil springs on my Glocks when I replace the guide rods with the stainless ones. That's when I get it home! My mdl21 has several thousand rounds thru it with NO signs of battering. I have both the captive and noncaptive types. For extended range sessions with full power duty ammo I use the 21# springs, for IDPA or pratice I use the 19#. By the way I also changed the striker spring to 6.5# for absolutely positive ignition. This used in conjunction with the 3.5# connector gives a good crisp trigger pull of about 4.5#. No doubt your recoil spring needs replacement if you are experiencing battering of the frame! I have also seen buffers for the Glocks.
Stay Safe,
Savage
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top